MIS Implants Restorative Lab
3DL works with the full MIS Implants implant platform line. Custom abutments, screw-retained and cement-retained crowns, and implant bridges — designed to OEM tolerances with verified scan body compatibility. This page documents the implant lines we support, OEM and third-party scan body part numbers, CAD library coverage, and clinical considerations for MIS cases.
About MIS Implants
Supported Implant Lines
| Implant Line | Connection | Platform Diameters |
|---|---|---|
| C1 | Internal conical (conical hex) | 3.30, 3.75, 3.90, 4.20, 5.00, 6.00 |
| V3 | Internal conical (triangular neck design at coronal portion) | 3.30, 3.90, 4.30, 5.00 |
| M4 | Internal hex | 3.30, 3.75, 4.20, 5.00 |
| SEVEN | Internal hex | 3.30, 3.75, 4.20, 5.00, 6.00 |
| LANCE+ | Internal hex (narrow / mini) | — |
Scan Body Compatibility
OEM Scan Body
MIS Scan Body / Scan Post
Source: lab.mis-implants.com · Verified by 3DL on 2026-05-08
Specific OEM scan body SKUs not surfaced in research. Since the Dentsply Sirona acquisition, MIS prosthetics are increasingly linked to the Atlantis CustomBase / abutment catalog — see Dentsply Atlantis chart for cross-references.
CAD libraries: 3Shape DME, exocad
Scanner compatibility: All major IOS via 3Shape DME / exocad libraries; Primescan referenced explicitly
Third-Party Compatible Scan Bodies
- TruAbutment
- DESS / Createch (commonly listed for MIS)
Final Torque Values
⚠️ Manufacturer-published torque specifications for clinical reference. Always verify against the current IFU before clinical use.
| Component | Torque |
|---|---|
| Final abutment screw | 30 Ncm |
| Healing abutment | 25 Ncm |
| Multi-unit abutment screw | 20 Ncm |
30 Ncm final restoration spec across C1 / V3 / M4 / SEVEN. Per-line variations should be verified at ifu.mis-implants.com for each specific SKU.
Source: www.mis-implants.com · Verified 2026-05-08
Clinical Notes & Considerations
- C1 and V3 share a conical connection family; clinicians often interchange prosthetics within the conical platform group, but verify per-diameter compatibility in the DS Atlantis chart.
- M4 and SEVEN share an internal hex platform, often interchangeable for prosthetics; many third-party scan bodies list them as a single library entry.
- Since the Dentsply Sirona acquisition (2016), MIS prosthetics are increasingly linked to the Atlantis abutment catalog.
3DL Workflow for MIS Implants Cases
- Identify the component before submission. Call (248) 919-7929 or message through the doctor portal — 3DL verifies the MIS implant line, platform diameter, and the correct scan body family at no charge.
- Scan with any major IOS. Upload the scan through the doctor portal. 3DL confirms receipt the same day and validates the scan body capture before any milling begins.
- 3DL designs in matched pairs. Custom abutment and final crown are designed together so the emergence profile of the abutment supports the crown's gingival contour exactly.
- Mill, finish, ship. Custom titanium or zirconia abutment plus final crown ship together in 7 to 10 business days. Verification jig included on request.
Frequently Asked Questions
Generic MIS workflow questions. See the homepage FAQ for general 3DL service questions.
Send your next MIS Implants case to 3DL.
Open an account in 2 minutes. No credit card. Upload your scan — 3DL verifies the scan body match, designs the custom abutment and final crown as a matched pair, and ships in 7 to 10 business days.
✓ Compatibility data verified by 3DL on 2026-05-08. Source: manufacturer documentation. Automated change-detection runs monthly against the source URLs listed in /data/scan-bodies.json.