Hiossen Restorative Lab
3DL works with the full Hiossen implant platform line. Custom abutments, screw-retained and cement-retained crowns, and implant bridges — designed to OEM tolerances with verified scan body compatibility. This page documents the implant lines we support, OEM and third-party scan body part numbers, CAD library coverage, and clinical considerations for Hiossen cases.
About Hiossen
Supported Implant Lines
| Implant Line | Connection | Platform Diameters |
|---|---|---|
| ET System (ET III, ET IV) | Internal hex with conical interface (11° Morse, 'Conical Connection ET') | NP (Mini/Narrow), RP (Regular) |
| EK System | Internal conical hex (single platform across diameters) | single platform |
| SS / US (legacy) | Tissue level / external hex | — |
Scan Body Compatibility
OEM Scan Body
ET Scan Body, EK Scan Body, Scan Body Link
Source: hiossen.com · Verified by 3DL on 2026-05-08
Hiossen eShop lists Mini Short, Mini Long, Regular Short, Regular Long configurations; specific public SKU strings not surfaced in research. Call (248) 919-7929 — 3DL orders to spec.
CAD libraries: exocad, 3Shape (separate 'new' vs 'old' scanbody libraries)
Scanner compatibility: All major IOS
Third-Party Compatible Scan Bodies
Scan Healing Abutment — 2-in-1 Healing + Scan
Osstem and Hiossen publish a 2-in-1 Scan Healing Abutment that doubles as both a healing abutment and a scan body. The component head carries 4 occlusal landmark indents that encode size and diameter, so the lab can identify the exact part from the intraoral scan.
Per the Osstem / Hiossen documentation, the Scan Healing Abutment is "a healing abutment with scan body function, with specifications identified by indents on the abutment head." The 4 occlusal landmark indents encode size/diameter so the lab identifies the component directly from the STL — no separate scan body, no manual platform entry.
Compatible Implant Lines
- Osstem TS System (TSIII SA, TSIII SOI, TSII)
- Hiossen ET System (ET III, ET IV) — same prosthetic interface as Osstem TS
Sizes Available (12 SKUs)
- Diameters: Ø 4.0, 4.5, 5.0, 6.0 mm
- Heights: 5, 7, 9 mm
- Cylindrical with a coded head (not anatomically contoured)
Workflow
- Place implant; seat Scan Healing Abutment with the integrated 1.2 hex driver-carrier.
- Heal — soft-tissue healing.
- Scan with the abutment in place — landmarks identify the component.
- Design — lab places the prosthesis library file at the encoded position.
- Deliver — final prosthesis can be placed immediately upon removal of the Scan Healing Abutment.
Key Advantages
- 2-in-1 reduces appointments and component swaps.
- Coded landmarks identify size from the scan — no manual transcription.
- Stable soft-tissue management with one component throughout the healing phase.
Sources: eshop.hiossen.com — Scan Healing Abutment · Hiossen Scan Healing Abutment IFU (PDF) · Osstem Scan Healing Abutment doc (PDF). Verified by 3DL on 2026-05-08.
Final Torque Values
⚠️ Manufacturer-published torque specifications for clinical reference. Always verify against the current IFU before clinical use.
| Component | Torque |
|---|---|
| Final abutment screw | 30 Ncm |
| Healing abutment | hand-tight |
| Cover screw | hand-tight |
Variation by Implant Line
- ET — Regular Platform (≥4.0 mm): 30 Ncm
- ET — Mini Platform (3.5 mm): 20 Ncm
Diameter-dependent: 20 Ncm for 3.5 mm Mini; 30 Ncm for 4.0 / 4.5 / 5.0 / 6.0 / 7.0.
Source: hiossen.com · Verified 2026-05-08
Clinical Notes & Considerations
- Hiossen ET and Osstem TS share geometry — Hiossen ET libraries are commonly cross-referenced with Osstem TS in third-party CAD libraries, but Hiossen publishes them under separate file names. Confirm 'new scanbody' vs 'old scanbody' version when downloading; the asymmetric scan body redesign requires the corresponding library.
- Scan bodies tighten with a 1.2 mm hex driver per Hiossen product pages.
- Mini/Narrow Platform vs Regular Platform must be matched at scan-body selection — they are not visually interchangeable.
3DL Workflow for Hiossen Cases
- Identify the component before submission. Call (248) 919-7929 or message through the doctor portal — 3DL verifies the Hiossen implant line, platform diameter, and the correct scan body family at no charge.
- Scan with any major IOS. Upload the scan through the doctor portal. 3DL confirms receipt the same day and validates the scan body capture before any milling begins.
- 3DL designs in matched pairs. Custom abutment and final crown are designed together so the emergence profile of the abutment supports the crown's gingival contour exactly.
- Mill, finish, ship. Custom titanium or zirconia abutment plus final crown ship together in 7 to 10 business days. Verification jig included on request.
Frequently Asked Questions
Generic Hiossen workflow questions. See the homepage FAQ for general 3DL service questions.
Send your next Hiossen case to 3DL.
Open an account in 2 minutes. No credit card. Upload your scan — 3DL verifies the scan body match, designs the custom abutment and final crown as a matched pair, and ships in 7 to 10 business days.
✓ Compatibility data verified by 3DL on 2026-05-08. Source: manufacturer documentation. Automated change-detection runs monthly against the source URLs listed in /data/scan-bodies.json.